alexpopaita
22/11/2016, 19:04
All components of the Climatonic system are exercised during this test.
Requirements:
Ignition off, Motor off, Vehicle stopped, Battery voltage 15 < 15.5 V.
To begin the self-test routine, simultaneously press and hold „ECON“ and „Recirculate“then turn on the iginition (do not start engine) while keeping the buttons pressed, andcontinue pressig the buttons for about 2 seconds more. All LCD segments in theClimatronic display will now illuminate.
During the following automatic actuator test (duration ~30 seconds), all actuators will beexercised in a serial fashion. In addition, all control unit inputs (Sensors, Motors,Servos, etc) will be checked that can be checked with th motor off. During the test all During the following automatic actuator test (duration ~30 seconds), all actuators will beexercised in a serial fashion. In addition, all control unit inputs (Sensors, Motors,Servos, etc) will be checked that can be checked with th motor off. During the test all
To leave „Internal Error Memory Mode“, press the „ECON“ button.
Requirements:
Ignition off, Motor off, Vehicle stopped, Battery voltage 15 < 15.5 V.
To begin the self-test routine, simultaneously press and hold „ECON“ and „Recirculate“then turn on the iginition (do not start engine) while keeping the buttons pressed, andcontinue pressig the buttons for about 2 seconds more. All LCD segments in theClimatronic display will now illuminate.
During the following automatic actuator test (duration ~30 seconds), all actuators will beexercised in a serial fashion. In addition, all control unit inputs (Sensors, Motors,Servos, etc) will be checked that can be checked with th motor off. During the test all During the following automatic actuator test (duration ~30 seconds), all actuators will beexercised in a serial fashion. In addition, all control unit inputs (Sensors, Motors,Servos, etc) will be checked that can be checked with th motor off. During the test all
To leave „Internal Error Memory Mode“, press the „ECON“ button.