PDA

Ver la Versión Completa : ayuda,fallo motor(coche anda a 3 cilindros)



vicenvi
31/10/2009, 13:19
pues hara 2 semanas el coche en empezo andar a 3 cilindros pero al dia siguiente ya funciono bien hasta ahora,cuando me pasara pase el vag com y me daba fallo de encendido en cilindro numero 1 y lo que hice fue cambiar la bobina de encendido del cilindros uno por el del 3,asi si para la proxima me daba falla en cilindro 3 sabia que era la bobina,pero hoy medio fallo otra vez y acabo de pasar vag com y da 2 fallos y uno de ellos en el cilindro 4
¿que puede ser?
[Only registered and activated users can see links]

REIFNITZ
31/10/2009, 14:41
Otra bobina te la esta jugando.

lebrillo
31/10/2009, 16:07
¿que coche tienes?

vicenvi
31/10/2009, 18:23
golf v 1.4 tsi 170cv del 2006 con 49000km

genial10
31/10/2009, 18:34
Buenas..

Esto me paso a mi,:cry: pero en el glof gti iv ..bobina,... :ok:

saludos

lebrillo
31/10/2009, 18:38
SACADO DE LA WIKI DE ROSSTECH

16684/P0300/000768 - Random/Multiple Cylinder Misfire Detected

Possible Causes


Air Intake System leaking
Fuel Supply faulty
Injector(s) faulty
Ignition Cable(s) and/or Spark Plug(s) faulty
Ignition Coil(s) faulty
Exhaust Gas Recirculation (EGR) Valve (N18) stuck/open
Camshaft Position Sensor (G40) faulty
Possible Solutions


Check Misfire Recognition
Check Air Intake System
Check Fuel Supply
Check Injector(s) and Injector Sealing
Check Ignition Cable(s) and Spark Plug(s)
Check Ignition Coil(s)
Check Exhaust Gas Recirculation (EGR) Valve (N18)
Check Camshaft Position Sensor (G40)
Special Notes


This DTC indicates that one or multiple cylinders are misfiring, but the ECU fails to identify the cylinder.
</H2>

16688/P0304/000772 - Cylinder 4 Misfire Detected

Possible Causes


Ignition system
Fuel injectors
Fuel pressure
Running out of fuel
EVAP canister purge valve
Evaporative emission system
Low compression
Base engine problems
Controle Module damaged
Special Notes


This feature search for engine misfire in a specific cylinder. Most of the time the cause for a misfire is a lack of combustion in a cylinder due to absence of spark, poor fuel metering, or poor compression.

Dhusuf
31/10/2009, 21:22
Hola compañero, prueba con las bujias :)

un saludo,
Dhusuf.

vicenvi
31/10/2009, 21:29
no creo que sean las bujias,antes son las bobinas que las bujias